 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC773LC3B v03.0809 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz Typical Applications The HMC773LC3B is ideal for: * Point-to-Point Radios * Point-to-Multi-Point Radios & VSAT * Test Equipment & Sensors Features Passive: No DC Bias Required Input IP3: +22 dBm LO/RF Isolation: 38 dB Wide IF Bandwidth: DC - 8 GHz 12 Lead Ceramic 3x3 mm SMT Package: 9mm2 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT * Military End-Use Functional Diagram General Description The HMC773LC3B is a general purpose double balanced mixer in a leadless RoHS compliant SMT package that can be used as an upconverter or downconverter between 6 and 26 GHz. This mixer requires no external components or matching circuitry. The HMC773LC3B provides excellent LO to RF and LO to IF suppression due to optimized balun structures. The mixer operates with LO drive levels above +13 dBm. The HMC773LC3B eliminates the need for wire bonding, allowing use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25 C, IF = 0.5 GHz, LO = +13 dBm* Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) IP2 (Input) 1 dB Gain Compression (Input) 31 5 Min. Typ. 6 - 16 DC - 8 9 37 37 11 17 45 10 21 10 12 Max. Min. Typ. 16 - 26 DC - 8 9 39 32 20 22 50 11 11 Max. Units GHz GHz dB dB dB dB dBm dBm dBm * Unless otherwise noted, all measurements performed as downconverter, IF = 0.5 GHz 9 - 386 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC773LC3B v03.0809 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz Conversion Gain vs. Temperature 0 Isolation 0 -10 ISOLATION (dB) -20 -30 -40 -50 -60 CONVERSION GAIN (dB) -4 -8 LO/RF RF/IF LO/IF -12 +25C +85C -40C 9 6 10 14 18 FREQUENCY (GHz) 22 26 -16 -20 6 10 14 18 FREQUENCY (GHz) 22 26 Conversion Gain vs. LO Drive 0 9 dBm 11 dBm 13 dBm 15 dBm Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 RF LO CONVERSION GAIN (dB) -4 -8 -12 -16 -20 6 10 14 18 FREQUENCY (GHz) 22 26 -35 6 10 14 18 FREQUENCY (GHz) 22 26 IF Bandwidth 0 Conversion Gain IF Return Loss Upconverter Performance Conversion Gain vs. LO Drive 0 -10 CONVERSION GAIN (dB) -5 RESPONSE (dB) -4 -8 -15 -12 9 dBm 11 dBm 13 dBm 15 dBm -20 -16 -25 0 2 4 6 8 FREQUENCY (GHz) 10 12 -20 6 10 14 18 FREQUENCY (GHz) 22 26 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 387 MIXERS - SINGLE & DOUBLE BALANCED - SMT HMC773LC3B v03.0809 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz Input IP3 vs. LO Drive * 30 25 20 IP3 (dBm) 15 10 5 Input IP3 vs. Temperature* 30 25 20 IP3 (dBm) 9 dBm 11 dBm 13 dBm 15 dBm 15 10 5 0 +25C +85C -40C 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 0 6 10 14 18 FREQUENCY (GHz) 22 26 6 10 14 18 FREQUENCY (GHz) 22 26 Input IP2 vs. LO Drive * 80 70 60 IP2 (dBm) Input IP2 vs. Temperature * 80 70 60 IP2 (dBm) 50 40 30 20 10 0 +25C +85C -40C 50 40 30 20 10 0 6 10 14 18 FREQUENCY (GHz) 22 26 9 dBm 11 dBm 13 dBm 15 dBm 6 10 14 18 FREQUENCY (GHz) 22 26 Input P1dB vs. LO Drive 20 Input P1dB vs. Temperature 20 16 P1dB (dBm) P1dB (dBm) 11 dBm 13 dBm 15 dBm 16 12 12 8 8 +25C +85C -40C 4 4 0 6 10 14 18 FREQUENCY (GHz) 22 26 0 6 10 14 18 FREQUENCY (GHz) 22 26 * Two-tone input power = -5 dBm each tone, 1 MHz spacing. 9 - 388 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC773LC3B v03.0809 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz MxN Spurious Outputs nLO mRF 0 1 2 3 0 XX 0 69.0 >100 1 14.5 0 61.7 79.4 2 30.3 21.6 62.5 65.8 3 31.3 22.5 63.7 68.2 4 53.3 46.7 74.6 59.6 Absolute Maximum Ratings RF / IF Input LO Drive Channel Temperature Continuous Pdiss (Ta = 85 C) (derate 3.3 mW/C above 85 C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature +21 dBm +21 dBm 150 C 210 mW 170 C/W -65 to +150 C -40 to +85 C RF = 9 GHz @ -10 dBm LO = 8 GHz @ +13 dBm All values in dBc below the IF output power level. 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 - 389 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM - C - 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 8. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC773LC3B v03.0809 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz Pin Descriptions Pin Number Function Description These pins and package bottom must also be connected to RF/DC ground. Interface Schematic 1, 3, 7, 9, 10, 12 GND 2 LO This pin is AC coupled and matched to 50 Ohms. 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 5 IF 8 RF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. This pin is AC coupled and matched to 50 Ohms. These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 4, 6, 11 N/C 9 - 390 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC773LC3B v03.0809 GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz Evaluation PCB 9 MIXERS - SINGLE & DOUBLE BALANCED - SMT 9 - 391 List of Materials for Evaluation PCB 125042 [1] Item J1 - J2 J3 U1 PCB [2] Description SRI SMA Connector 2.92mm PCB Mount K-Connector HMC773LC3B Mixer 125040 Evaluation PCB [1] Reference this number when ordering compete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com |
Price & Availability of HMC773LC3B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |